Ryobi RY41141 Manuel d'utilisateur télécharger pdf (Page 12)

Page 8 — English

TOOLS NEEDED

See Figure 3.

The following tools (not included or drawn to scale) are

needed for assembly:

Phillips Screwdriver

ATTACHING GRASS DEFLECTOR

See Figures 4 - 5.

WARNING:

The line cutting blade on the grass deflector is sharp.

Avoid contact with the blade. Failure to avoid contact

can result in serious personal injury.

Remove the bag with screws from the grass deflector.

Line up the screw holes in the grass deflector with the

holes in the motor housing.

Install supplied screws and tighten by turning clockwise

with a phillips screwdriver.

Plug product into extension cord.

NOTE: Failure to remove all excess cord slack from ex-

tension cord retainer could result in plug loosening from

receptacle.

NOTE: Use only approved outdoor extension cords.

NOTICE:

Always use cord retainer to properly attach extension

cord to string trimmer. Failure to use cord retainer may

result in damage to string trimmer and/or extension cord.

STARTING/STOPPING THE TRIMMER

See Figure 6.

To start the string trimmer, press the switch trigger.

To stop the string trimmer, release the switch trigger.

ADJUSTABLE FRONT HANDLE

See Figure 7.

The angle of the front handle can be adjusted 180°.

Unplug the string trimmer.

 Set the trimmer on a flat surface and turn the knob

counterclockwise to loosen the handle.

 For trimming, adjust the handle upward.

 For edging, adjust the handle downward.

 Turn the knob clockwise until the handle is securely

tightened.

OPERATING THE TRIMMER

See Figure 8.

Follow these tips when using the string trimmer:

Hold the trimmer with your right hand on the rear handle

and your left hand on the front handle.

Keep a firm grip with both hands while in operation.

WARNING:

Do not allow familiarity with products to make you care-

less. Remember that a careless fraction of a second is

sufficient to inflict severe injury.

WARNING:

Always wear eye protection with side shields marked to

comply with ANSI Z87.1. Failure to do so could result in

objects being thrown into your eyes, resulting in possible

serious injury.

WARNING:

Never use blades, flailing devices, wire or rope on this

product. Do not use any attachments or accessories not

recommended by the manufacturer of this product. The

use of attachments or accessories not recommended

can result in serious personal injury.

Before each use, inspect the entire product for damaged,

missing, or loose parts such as screws, nuts, bolts, caps, etc.

Tighten securely all fasteners and caps and do not operate

this product until all missing or damaged parts are replaced.

Please call 1-800-860-4050 or contact an authorized service

center for assistance.

CONNECTING TO POWER SUPPLY

See Figure 6.

This product is designed with a cord retainer that prevents

the extension cord from being pulled loose while using.

Form a loop with the end of the extension cord.

Insert loop portion of extension cord through opening in

the bottom of the rear handle and place over cord retainer.

Slowly pull loop against cord retainer until the slack is

removed.

OPERATION

ASSEMBLY

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY41141 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Outils électriques Ryobi RY41141