Ryobi RY40001 Manuel de l'opérateur télécharger pdf (Page 11)

7 — English

ASSEMBLY

WARNING:

Failure to secure the string trimmer/edger attachment and

power head as instructed above could result in serious

personal injury.

REMOVING THE ATTACHMENT FROM THE

POWER HEAD

 Remove the battery pack.

 Turn the coupler counterclockwise to unlock. Then remove

the trimmer shaft from the power head.

ATTACHING GRASS DEFLECTOR

See Figures 4 and 5.

WARNING:

The line cut-off blade on the grass deflector is sharp.

Avoid contact with the blade. Failure to avoid contact

can result in serious personal injury.

 Remove the battery pack.

 Remove the plastic hardware bag from the grass deflector.

 Fit the grass deflector over the string head.

 Line up the screw holes in the grass deflector with the

holes in the motor housing.

 Install supplied screws and tighten by turning clockwise

with a phillips screwdriver.

WARNING:

To prevent accidental starting that could cause serious

personal injury, always remove the battery pack from the

product when assembling parts.

TOOLS NEEDED

See Figure 2.

The following tool (not included or drawn to scale) is needed

for assembly:

 Phillips screwdriver

CONNECTING THE POWER HEAD TO THE

ATTACHMENT

See Figure 3.

WARNING:

Never install, remove, or adjust any attachment while

power head is running or with the battery pack installed.

Failure to stop the motor or remove the battery pack can

result in serious personal injury.

The attachment connects to the power head by means of

a coupler device.

 Remove the battery pack if installed.

 Align the arrows on the string trimmer/edger attachment

and the power head. Then, Insert the plug on the string

trimmer/edger attachment into the opening on the power

head coupler. Make sure the plug is fully seated.

 Slide the threaded coupler on the power head onto the

threaded base on the attachment and turn the coupler

clockwise. Tighten securely.

NOTE: Once assembled correctly, the string trimmer/edger

attachment and power head should not separate when pulled.

Repeat above steps if pieces can be separated.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Ryobi RY40001 Manuel de l'opérateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Ryobi RY40001