Ryobi RHT2660DA Manuel d'utilisateur télécharger pdf (Page 15)

English

F D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG

machine, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment

of moving parts, binding of moving parts, breakage of

parts, mounting and any other conditions that may affect

its operation. A guard or other part that is damaged must

be properly repaired or replaced by an authorized service

center to avoid risk of personal injury.

■ NEVER LEAVE MACHINE RUNNING UNATTENDED.

TURN POWER OFF. Don’t leave machine until it comes

to a complete stop.

■ KEEP THE ENGINE FREE OF GRASS, LEAVES, OR

GREASE to reduce the chance of a ﬁ re hazard.

■ KEEP THE ExHAUST PIPE FREE OF FOREIGN OB-

JECTS.

■ FOLLOW MANUFACTURER’S RECOMMENDATIONS

FOR SAFE LOADING, UNLOADING, TRANSPORT,

AND STORAGE OF MACHINE.

■ KEEP MACHINE DRY, CLEAN, AND FREE FROM

LUBRICANT AND GREASE. Always use a clean cloth

when cleaning. Never use brake ﬂ uids, petrol, petroleum-

based products, or any solvents to clean machine.

■ STAY ALERT AND EXERCISE CONTROL. Watch what

you are doing and use common sense. Do not operate

tool when you are tired. Do not rush.

■ DO NOT OPERATE THE PRODUCT WHILE UNDER THE

INFLUENCE OF DRUGS, ALCOHOL, OR ANY MEDICA-

TION.

■ CHECK THE WORK AREA BEFORE EACH USE. Re-

move all objects such as rocks, broken glass, nails, wire,

or string which can be thrown or become entangled in

the machine.

■ DO NOT USE MACHINE IF SWITCH DOES NOT TURN

IT ON AND OFF. Have defective switches replaced by

an authorized service center.

■ BEFORE CLEANING, REPAIRING, OR INSPECTING,

shut off the engine and make certain all moving parts have

stopped. Disconnect the spark plug wire, and keep the

wire away from the plug to prevent accidental starting.

■ AVOID DANGEROUS ENVIRONMENT. Don’t use in

damp or wet locations or expose to rain. Keep work area

well lit.

■ NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Nor-

mal sparking of the motor could ignite fumes.

■ DO NOT OPERATE WHILE SMOKING OR NEAR AN

OPEN FLAME.

■ DO NOT OPERATE at night, at times of heavy fog, or at

any other times when your ﬁ eld of vision might be limited

and it would be difﬁ cult to gain a clear view of area.

■ Be familiar with all controls and the proper use of the

machine.

■ Beware of overhead power lines.

■ The cutting mechanism strikes any foreign object or the

machine should start making any unusual noise or vibra-

tion, shut off the power source and allow the machine to

stop. Disconnect the spark plug wire from the spark plug

and take the following steps:

1. inspect for damage;

2. check for and tighten any loose parts;

3. have any damaged parts replaced or repaired with

parts having equivalent speciﬁ cations.

■ Stop the engine and disconnect the spark plug wire from

the spark plug before

1. when adjusting the working position of the cutting

device;

2. cleaning or clearing a blockage;

3. checking, maintenance or working on the machine.

■ Do not inhale fuel fumes as they are toxic.

SPECIFIC SAFETY RULES

■ OPERATE THE UNIT BY BOTH HANDS.

■ DO NOT OPERATE AROUND dry brush, twigs, cloth

rags, or other ﬂ ammable materials.

■ NEVER START THE MACHINE if ice has formed in any

part of the equipment.

■ DO NOT USE ACIDS, ALKALINES, SOLVENTS,

FLAMMABLE MATERIAL, OR INDUSTRIAL GRADE

SOLUTIONS in this product. These products can cause

physical injuries to the operator and irreversible damage

to the machine.

■ NEVER ATTEMPT TO MAKE ANY ADJUSTMENTS

WHILE THE ENGINE (MOTOR) IS RUNNING (except

where specifically recommended by the manufac-

turer).

■ PROTECTIVE COVERS MUST ALWAYS COVER RO-

TATING PARTS WHEN THE ENGINE IS RUNNING.

■ KEEP COOLING AIR INTAKE (recoil starter area) and

mufﬂ er side of the engine at least 1m away from

buildings, obstructions, and other burnable objects.

■ KEEP THE ENGINE AWAY FROM FLAMMABLES

AND OTHER HAZARDOUS MATERIALS.

■ KEEP AWAY FROM HOT PARTS. The mufﬂ er and

other engine parts become very hot, use caution.

■ DO NOT TOUCH THE SPARK PLUG AND IGNITION

CABLE when starting and operating the engine.

■ CHECK FUEL HOSES AND JOINTS for looseness and

fuel leakage before each use.

■ CHECK BOLTS AND NUTS for looseness before each

use. A loose bolt or nut may cause serious engine

problems.

RHT2660DA_25lgs manual.indd 12RHT2660DA_25lgs manual.indd 12 12/20/03 12:00:10 PM12/20/03 12:00:10 PM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 238 239

Commentaires sur ces manuels

Pas de commentaire

Ryobi RHT2660DA Manuel d'utilisateur Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Tondeuses à gazon Ryobi RHT2660DA