Ryobi P422 Manuel d'utilisateur télécharger pdf (Page 3)

3 — English

SAFETY WARNINGS COMMON FOR GRINDING,

SANDING AND POLISHING OPERATIONS

This power tool is intended to function as a grinder,

sander, or polisher. Read all safety warnings,

instructions, illustrations and specifications provided

with this power tool. Failure to follow all instructions

listed below may result in electric shock, fire and/or

serious injury.

Operations such as wire brushing or cutting-off are

not recommended to be performed with this power

tool. Operations for which the power tool was not

designed may create a hazard and cause personal injury.

Do not use accessories which are not specifically

designed and recommended by the tool manufacturer.

Just because the accessory can be attached to your

power tool, it does not assure safe operation.

The rated speed of the accessory must be at least

equal to the maximum speed marked on the power

tool. Accessories running faster than their RATED SPEED

can break and fly apart.

The outside diameter and the thickness of your

accessory must be within the capacity rating of your

power tool. Incorrectly sized accessories cannot be

adequately guarded or controlled.

The arbor size of wheels, flanges, backing pads or

any other accessory must properly fit the spindle of

the power tool. Accessories with arbor holes that do not

match the mounting hardware of the power tool will run

out of balance, vibrate excessively and may cause loss

of control.

Do not use a damaged accessory. Before each use

inspect the accessory such as abrasive wheels for

chips and cracks, backing pad for cracks, tear or

excess wear, wire brush for loose or cracked wires.

If power tool or accessory is dropped, inspect for

damage or install an undamaged accessory. After

inspecting and installing an accessory, position

yourself and bystanders away from the plane of

the rotating accessory and run the power tool at

maximum no-load speed for one minute. Damaged

accessories will normally break apart during this test time.

Wear personal protective equipment. Depending on

application, use face shield, safety goggles or safety

glasses. As appropriate, wear dust mask, hearing

protectors, gloves and workshop apron capable of

stopping small abrasive or workpiece fragments.

The eye protection must be capable of stopping flying

debris generated by various operations. The dust mask or

respirator must be capable of filtrating particles generated

by your operation. Prolonged exposure to high intensity

noise may cause hearing loss.

Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking

into account the working conditions and the work to

be performed. Use of the power tool for operations dif-

ferent from those intended could result in a hazardous

situation.

BATTERY TOOL USE AND CARE

Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack into

power tools that have the switch on invites accidents.

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create

a risk of injury and fire.

When battery pack is not in use, keep it away from

other metal objects like paper clips, coins, keys, nails,

screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected

from the battery, avoid contact. If contact acciden-

tally occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the

battery may cause irritation or burns.

SERVICE

Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

WARNING!

To reduce the risk of injury, user must read instruction

manual.

When servicing a power tool, use only identical

replacement parts. Follow instructions in the Main-

tenance section of this manual. Use of unauthorized

parts or failure to follow Maintenance instructions may

create a risk of shock or injury.

GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

1 2 3 4 5 6 7 8 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ryobi P422 Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Ryobi P422