Ryobi ERT2100VK Guide de l'utilisateur télécharger pdf (Page 5)

276

Section

Free delivery on orders over £50 (UK mainland only) Orders UNDER £50 P&P £4.95

Call 03332 406406

More laminate trimmers

available online...

axminster.co.uk/laminatetrimmers

Laminate Trimmers

Model GKF600

Rating Industrial

Power 600W

Speed 33,000rpm

Collets Supplied 1/4”

Plunge Stroke -

Fine Height Adjuster Yes

Fine Fence Adjuster -

Spindle Lock Yes

Weight 1.5kg

Comparison Chart - Laminate Trimmers

Compact router trimmer that combines one motor

with different bases. This machine is great for a host of

small routing and trimming tasks in the workshop or

on site. The motor is ﬁ tted with variable speed control

and has soft start. It can be quickly interchanged and

locked into the required base. This kit comes complete with 3 bases:

trimming, plunge and bevel base.

Plunge base turns the machine into a plunge router with 2 solid

grip handles, a height adjuster with ﬁ ne adjustment and a stepped

turret for repetitive depth setting. The side fence ﬁ ts left or right

and has a 130mm reach from centre, however, you may wish to

add a wooden sub fence which would reduce this. Dust extraction

outlet is also supplied with a 35mm outlet. Easy to control suitable

for decorative edge working as well as small mortices and grooves.

Trimming base this small 90mm round base turns the machine

into a trimmer for single handed use. Use with or without the height

adjustable bearing guide for cutters without bearings, rolling on the

curve for a ﬁ ne cut. A 10mm template guide is supplied to ﬁ t this and

the side fence can also be used for straight work. The dust guard has

a 35mm outlet to attach an extractor hose if required.

Bevel base a small square 90mm base that can tilt and be locked at

a required angle (45°-0°-30°), allows for more scope when proﬁ ling

and jointing.

The machine is also supplied with 1/4” & 3/8” collet, 16mm &

10mm template guides, side fence, side grip handle (can replace

right plunge base handle), 2 dust extraction shrouds, 13 and

22mm wrenches and tool bag.

Makita

RT0700CX2

Router Trimmer

RT0700CX2 Router Trimmer Kit 230V £214.94 £179.12 501867

Inc.vat Ex.vat Code

3708F

Industrial

440W

35,000rpm

1/4”

Yes

1.2kg

Using the

roller guide

assembly

This versatile little machine doubles as a small router

for edge moulding, trimming and grooving or as a

laminate trimmer complete with a tilting base for

chamfer work. The combined guard and base unit

is ﬁ tted with a height adjustment wheel to set the

depth of cut and a quick action toggle clamp. The adjustable fence

is used to set both the distance in from the edge of the work and

the chamfer angle and has an integral handle for safe two-handed

control. An edge follower roller guide is also supplied for trimming

curves. An auxiliary side fence can be ﬁ tted to convert the machine

into a small router for edge moulding, grooving and trimming

applications. The machine is also ﬁ tted with a pair of high intensity

light bulbs that illuminate the cutter and

work piece

Supplied with tilting trimming fence, router cutter, adjustable

routing fence, roller guide assembly, two collet spanners and

10mm guide bush.

3708F Trimmer 230V £179.94 £149.95 300248

Inc.vat Ex.vat Code

Makita 3708F

Trimmer

RT0700CX2

Industrial

710W

10,000-30,000rpm

1/4”

Plunge 0-35mm, Trim 0-40mm

On plunge base

1.8kg

Known as a module edge router by Festool,

this is a very versatile tool with

interchangeable bases to widen its

uses and ensure very positive handling

and accuracy. Just by handling this

tool you will see the advantage of the

bases being easily interchangeable, and

how simple handling and guiding the cutter is,

as well as the adjustability. The standard base

can be used with or without the side fence. The

motor being in the vertical position allows for a

wide range of hand routing, guiding the router

where needed. With the extended trimming base ﬁ tted, the

motor is in a horizontal position. The cutter is then guided by

the bearing assembly to give extremely accurate trimming of

solid edges and laminates, with pressure applied exactly where

needed. Extraction outlets are ﬁ tted on the bases as well as the

fence for optimum extraction. The 720W motor has an electronic

speed adjustment switch to ensure maximum power and speed

selection depending on material and cutter. The motor also has a

temperature monitor for long service life.

Supplied as a set in a SYSTAINER® T-LOC case with the

following accessories: 1/4” and 8mm collets, parallel side

fence with ﬁ ne adjuster and extraction hood, 1.5° router

table trimming base and bearing follower, tarnishing pad and

extraction hood.

Festool MFK 700

EQ-Set Edge Router

MFK 700

Industrial

720W

10000-26000rpm

8mm

Yes

1.9kg

MFK 700 Trimmer 230V £424.94 £354.12 211222

1/4” Collet £32.94 £27.45 483356

Extraction Hose D27 x 3.5m £56.45 £47.04 452877

19mm Straight cutter, 16mm depth £35.45 £29.54 211223

Chamfer cutter 22° £37.44 £31.20 211224

Chamfer cutter 45° £41.94 £34.95 211226

Inc.vat Ex.vat Code

Known as a module edge router by Festool,

bases being easily interchangeable, and

Cantex MkII 230V £1,449.95 £1,208.29 702777

Set of 3 Replacement Blades £27.44 £22.87 131822

Inc.vat Ex.vat Code

Lamello Cantex

Lipping Machine

Inc.vat

Ex.vat Code

Tilting base adds a

unique feature to

this router. Angled

cuts can be achieved

without the need for

many different cutters

The clear extended

base gives increased

stability whilst

working on an edge

or larger areas. It is

also ﬁ tted with a dust

extraction outlet

A true gem of a tool, this has to be one of the best small routers

on the market, perfectly formed, adding huge potential to your

tool kit. We just love this tool.

Totally controllable for trimming, adding a decorative mould to

edges or panel work, this is such a versatile router. Supplied with

3 additional bases: 95 x 84mm base, 133mm diameter round base

and a unique tilting base as well as a parallel fence. All are easy to

swap when required and give the machine more versatility. The

compact design (overall size 94 x 190mm high) allows for single

handed use if required and means it is also good for conﬁ ned

areas. All contained in a strong storage case to keep everything

together.

Also available is a set of 4 small TCT cutters containing a 45°

chamfer cutter, 3/16” radius ovolo

and rounding over cutter, self guided

trimming and a template proﬁ le cutter.

Bosch GKF 600

Palm Router Kit

The parallel side fence

guides the router

along an edge. Ideal

for rebating and

grooving, 160mm in

length

Kit supplied with the GKF600 Router, 3 bases

(133mm round, extension with handle and

tilting), side fence, roller guide, insulation

cover and collect spanner

Palm Router Kit 230V £144.95 £120.79 702335

Palm Router Kit 110V £144.95 £120.79 950704

Router Kit & Cutter Set Package 230V £179.95 £149.96 719995

Router Kit & Cutter Set Package 110V £179.95 £149.96 718677

TE 600 Plunge Base £69.95 £58.29 503891

Additional Side Fence for Router £59.94 £49.95 447252

Router Kit & Plunge Base 230V £209.95 £174.96 717435

Router Kit & Plunge Base 110V £209.95 £174.96 717436

Inc.vat Ex.vat Code

Allows you to achieve precise routing

• Depth scale in metric and imperial

• Micro ﬁ ne depth adjustment, 7-step turret depth stop

• Good cutter visibility, clear sub base opening of 54mm

• Maximum bit size of 44mm

• Motor body locks with quick clamp

• Smooth plunge action (max 55mm) with sprung lock lever

• Bosch parallel fence and rail adaptor can be ﬁ tted

Bosch TE 600 Plunge Base

07_Routing 272_299.indd 276 29/11/2013 11:29

1 2 3 4 5 6 7 8 9 10 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Ryobi ERT2100VK Guide de l'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Ryobi ERT2100VK