Ryobi RY43200 Manuel de l'opérateur télécharger pdf (Page 11)

Page 11 — English

ASSEMBLY

INSTALLING FRONT HANDLE

See Figures 3 - 4.

Install the front handle so that the short side of the

handle is on the same side as the motor.

 Disconnect the lopper from the power supply.

 Rotate the front handle knob counterclockwise

to remove. Set knob and washer aside.

 Remove the bolt cover and bolt.

 With the jaws of the lopper closed, install the

front handle in the vertical upright position.

WARNING:

Never position the front handle so that it is for-

ward of the vertical upright position. Positioning

the handle in this forward area could cause the

operator to lose control of the lopper and result

in serious personal injury.

 Reinstall the bolt and bolt cover.

 Reinstall the washer and front handle knob;

rotate knob clockwise to tighten securely.

Fig. 3

FRONT

HANDLE

KNOB

FRONT

HANDLE

BOLT

WASHER

DO NOT POSITION HANDLE FORWARD

OF THE VERTICAL UPRIGHT POSITION

Fig. 4

SHORT

SIDE

MOTOR

BOLT

COVER

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Pas de commentaire

Ryobi RY43200 Manuel de l'opérateur Page 11