Ryobi TSS100L1 Manuel d'utilisateur télécharger pdf (Page 10)

100

10 — English

FEATURES

KNOW YOUR COMPOUND MITER SAW

See Figures 1 and 2.

The safe use of this product requires an understanding of

the information on the tool and in this operator’s manual as

well as a knowledge of the project you are attempting. Before

use of this product, familiarize yourself with all operating

features and safety rules.

10 in. BLADE

A 10 in. blade is included with the compound miter saw. It

will cut materials up to 4 in. thick or 6 in. wide, depending

upon the angle at which the cut is being made.

13 AMP MOTOR

The saw has a powerful 13 amp motor with sufficient power

to handle tough cutting jobs. It is made with all ball bearings,

and has externally accessible brushes for ease of servicing.

BEVEL LOCK LEVER

The bevel lock lever securely locks your compound miter

saw at desired bevel angles. The bevel lock lever is spring

loaded and is released by pulling the lever away from the

saw housing and ratcheting the lever.

CARRYING HANDLE

See Figure 3.

For convenience when carrying or transporting the miter

saw from one place to another, a carrying handle has been

provided on top of the saw arm. To transport, turn off and

unplug the saw, then lower the saw arm and lock it in the

down position by pulling the lock pin away from the saw

housing and rotating it until it clicks into the slot.

ELECTRIC BRAKE

An electric brake has been provided to quickly stop blade

rotation after the switch is released.

LASER GUIDE

For more accurate cuts, a laser guide is included with the

miter saw. When used properly, the laser guide makes

accurate, precision cutting simple and easy.

MITER FENCE

The miter fence on the compound miter saw has been

provided to hold your workpiece securely against when

making all cuts. The left side is larger providing additional

support.

MITER LOCK HANDLE

See Figure 3.

The miter lock handle securely locks the saw at desired

miter angles.

SAW ARM LOCKED IN DOWN POSITION

LOCK

MITER LOCK

HANDLE

SAW

ARM

CARRYING

HANDLE

Fig. 3

MITER SCALE

The miter scale has index points provided at 0°, 15°, 22.5°,

31.6°, 45°, and 60.°

POSITIVE STOPS ON MITER TABLE

Positive stops have been provided at 0°, 15°, 22.5°, 30°, and

45° on both the left and right side of the miter table.

SELF-RETRACTING LOWER BLADE GUARD

The lower blade guard is made of shock-resistant, see-through

plastic that provides protection from each side of the blade.

It retracts over the upper blade guard as the saw is lowered

into the workpiece.

SLIDE BAR

When unlocked, the saw arm will glide forward and backward

the length of the slide bar for cutting various workpiece widths.

SLIDE LOCK KNOB

The slide lock knob locks and unlocks the sliding feature

of this tool.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 99 100

Commentaires sur ces manuels

Pas de commentaire

Ryobi TSS100L1 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Scies à moteur Ryobi TSS100L1