Ryobi TSS100L1 Manuel d'utilisateur télécharger pdf (Page 11)

11 — English

FEATURES

The following tools (not included) are needed for making adjustments or installing the blade:

TOOLS NEEDED

Fig. 6

COMBINATION

SQUARE

FRAMING SQUARE

COMBINATION WRENCHES (2)

(10 mm, 12 mm)

HEX KEYS (3)

(3 mm, 5 mm, 6 mm)

Fig. 4

Fig. 5

PADLOCK

SWITCH

TRIGGER

SWITCH

TRIGGER

SPINDLE

LOCK BUTTON

PHILLIPS SCREWDRIVER

SPINDLE LOCK BUTTON

See Figure 4.

The spindle lock button locks the spindle and stops the

blade from rotating. Depress and hold the lock button while

installing, changing, or removing blade.

SWITCH TRIGGER

See Figure 5.

To prevent unauthorized use of the compound miter saw,

disconnect it from the power supply and lock the switch in

the off position. To lock the switch, install a padlock (not

included) through the hole in the switch trigger. A lock with

a long shackle up to 9/32 in. diameter may be used. When

the lock is installed and locked, the switch is inoperable.

Store the padlock key in another location.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 99 100

Pas de commentaire

Ryobi TSS100L1 Manuel d'utilisateur Page 11